Ultra-heavy Turntable
Granite base, stainless steel platter, etc. total weight of 100kg. The super-heavy body suppresses unwanted vibrations. The platter and tonearm are air-floating, so the air film also absorbs unwanted vibrations. The 27kg platter is supported only by the pressure of the air (only a few hundred grams). Normally, with a single point of support, you’ll hear a dinging sound when you hit the platter, but by damping it with an air film, you’ll get a knotty sound.
Non-servo Motor Drive
The servo noise is eliminated by open control without a servo. The platter is driven by a DC Brush-less motor and thread, and the platter rotates by inertia alone.
It uses a unique “XFD system” that provides to the motor a highly accurate voltage with no fluctuations, based on a crystal transmitter.
Air Float Linear Tracking Tonearm
Like the platter, the air film absorbs unwanted vibrations of the tonearm, and the 0.1g of air force moves smoothly and accurately traces the sound grooves. The linear tracking system, which has the same trajectory as record cutting, is also used. It eliminates tracking errors between the outer and inner circumference for fine and stable pickup.
High-quietness Air Pump
The air pump that floats the platter and arm is a motorized system. It provides vibration-free compressed air for long-term, stable operation. In addition, a double-sealed soundproofing system ensures that it remains quiet enough to be placed in a listening room.
Specifications
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
- Product appearance and specifications are subject to change without notice.
- Due to the use of granite, the pattern and color tone of stones may vary depending on the production lot.
| Weight | 90000 g |
|---|