It is equipped with the ultra-reliable C3g, developed by Deutsche Telekom for telephone repeaters. The thin grid lines and large distance between electrodes enable high linearity amplification. The C3g is soldered directly onto the board to reduce noise at the contact point.
Current distortion and electromagnetic noise can enter through the AC line. This product is powered by a large nickel-metal hydride battery and is completely isolated from the AC line. Therefore, it amplifies to the level required by the preamp without adding anything extra.
・Battery Run Time: 5 Hours (Optionally 9 Hours)
・Battery Charging Time: 4 Hours (Optionally 8 Hours)
Built-in MC transformer. The MC cartridge can be amplified by connecting a cable. The output is also isolated from other devices by a transformer system, which is not affected by noise. The transformer uses a high permeability super permalloy core, which allows minute signals to pass through, resulting in a high degree of linearity.
MM cartridges are also supported. 1 MC and 2 MM inputs, 3 inputs in total. By adding an external MC transformer, two MM channels can be used for MC cartridges. Inputs and outputs are unbalanced and balanced.
Specification
|
* Knobs and terminals are not included.
- This is a dedicated RIAA phono equalizer amplifier. Please note that it is not suitable for other equalizer curves.
- Product appearance and specifications are subject to change without notice.